首页>计算机>思科认证>考试介绍>正文
Cisco认证考试中的 Switch命令详细说明

www.zige365.com 2007-9-3 9:32:29 点击:发送给好友 和学友门交流一下 收藏到我的会员中心
 

1.在基于IOS的交换机上设置主机名/系统名:

switch(config)# hostname hostname

在基于CLI的交换机上设置主机名/系统名:

switch(enable) set system name name-string

2.在基于IOS的交换机上设置登录口令:

switch(config)# enable password level 1 password

在基于CLI的交换机上设置登录口令:

switch(enable) set password

switch(enable) set enalbepass

3.在基于IOS的交换机上设置远程访问:

switch(config)# interface vlan 1

switch(config-if)# ip address ip-address netmask

switch(config-if)# ip default-gateway ip-address

在基于CLI的交换机上设置远程访问:

switch(enable) set interface sc0 ip-address netmask broadcast-address

switch(enable) set interface sc0 vlan

switch(enable) set ip route default gateway

4.在基于IOS的交换机上启用和浏览CDP信息:

switch(config-if)# cdp enable

switch(config-if)# no cdp enable

为了查看Cisco邻接设备的CDP通告信息:

switch# show cdp interface [type modle/port]

switch# show cdp neighbors [type module/port] [detail]

在基于CLI的交换机上启用和浏览CDP信息:

switch(enable) set cdp {enable|disable} module/port

为了查看Cisco邻接设备的CDP通告信息:

switch(enable) show cdp neighbors[module/port] [vlan|duplex|capabilities|detail]

我要投稿 新闻来源:赛迪网-技术社区 编辑: 作者:刘云
相关新闻
思科认证经典资料:CISCO协议总结大全
思科认证的36个热门考点
思科认证CCNA5.0串讲1 OSI与TCP/IP
思科认证:入侵命令详解
思科认证:教你使用几种常见命令
思科认证基础:Switching 命令大全