A. TCP

B. IP

C. IPX

D. Frame relay
 
12: You are using an application on your Windows 2000 client machines that provides error correction. You need a protocol to provide fast transport. Which protocol should your application use?

A. TCP

B. IP

C. UDP

D. SPX

E. AppleTalk
 
13: When using TCP, after a session is open, the applications can adjust the number of segments they receive before sending an acknowledgment. This behavior is known as ______________.

A. MTU adjustment

B. Windowing

C. Flexible Send Path

D. FCS
 
14: If the destination did not receive a segment, how will the TCP host know to resend the information?

A. The ACK received will not include the segment number that was not received.

B. The ACK received will include the segment number that was not received.

C. The sending host will send a PACK to verify segment receipt.

D. The destination host will send a YACK message back to the sending host.
 
15: You are planning on using a single network that supports 208 users. Which IP address class would you choose to be the most efficient?

A. Class A

B. Class B

C. Class C

D. Class D

E. Class E
 
16: RFC 1918 defines the private IP address ranges. Which of the following IP addresses are considered part of these ranges? (Choose three.)

A. 10.23.45.67

B. 126.21.34.56

C. 172.16.32.1

D. 172.31.234.55

E. 192.169.4.5
 
17: A new network is being designed for your company, Acme, Inc. If you use a Class C IP network, which subnet mask will provide one usable subnet per department while allowing enough usable host addresses for each department specified in the table?

Department
 Number of Users
 
Corporate
 7
 
Customer Support
 15
 
Financial
 13
 
HR
 7
 
Engineering
 16