首页>计算机>微软认证>试题中心>正文
70-059TCP/IP 4.0 试题回顾(4)

www.zige365.com 2007-10-25 11:52:34 点击:发送给好友 和学友门交流一下 收藏到我的会员中心


18)You are configuring a IIS server on NT Server a which is going to be used as a FTP Server and also a WWW Server. How will you configure it for the Host record? CNAME ..... MAIL SERVER? MX

19)You want to monitor the NT Workstation performance from a Unix client. How will you do it? What Software (utility?) at NT Workstation and at Unix host? SMNP MANAGEMENT SOFTWARE ON THE UNIX AND SMNP SERVICE ON THE NT SERVER.

20)You don t want to have trap messagees from unauthorized SNMP Hosts. How will you configure the SNMP agent workstation? "Community Name" and "Only Accept SNMP packages from these Hosts".

21)When you ftp a host name using UNC you get a "Bad IP address" message. What could be the possible reason? HOSTS FILE.

22)You can ping the remote host using the IP address but not through netuse \\....\... Why? WINS or LMHOSTS.

23)You are not able to ping the IP address of a remote host on another subnet using Netbios name but through IP address.You can also ping the other hosts on that subnet using both ways.What went wrong? CLIENT NOT USING WINS SERVER.
24)You have a domain spanning across three subnets.You want the clients in all the 3 subnets to be able to communicate and browse each other. How will you do that?

You install and configure an NT Server to be put in the middle of three subnets.

Required:

It should be made to act as a router.
Optional:

IP router and should be made to dynamically update its routing table whenever routers are added and removed from the network.
That machine to be able to supply IP address to all the machines belonging to the three subnets.
Also you want a NT Workstation to be sent a trap message across the network.
>Configure the Server to act as router.

>Enable IP Forwarding.

>Implement the DHCP Server on the NT Server.

>Configure RIP.


--------------------------------------------------------------------------------


26)You want a Workstation in Subnet A to browse and Communicate with the other workstation in subnet B. But you can t even though they have their own WINS Servers installed.What will you do? WINS REPLICATION.

27)You have Subnet A, Subnet B and Subnet C. The Workstations in the subnet A&B uses the WINS in the Subnet A. The Workstations in Subnet C uses its own. How will you configure to have the users of Subnet C and B to browse themselves freely? WINS REPLICATION.

28)You have two WINS servers and you want them to participate in replication.The link is a 56kb Slow link.You also want the Replication to take place once in a day.In the display appellete the WINS at Subnet A is configured to replicate once it get 5000 entries with its push partner WINS at subnet B. The WINS at Subnet B is configured to replicate with its pull partner to replicate once in 24 hours. Just grade it.

29)You don t want to resolve host names into IP address using a DNS which contains static entries in it.What will you install in alliance with DNS to resolve IP address from a dynamically updated DNS database? WINS and ENABLE THE DNS FOR WINS RESOLUTION.

本新闻共3页,当前在第2页  1  2  3  

我要投稿 新闻来源: 编辑: 作者:
相关新闻
70-059TCP/IP 4.0 试题回顾(2)
70-059TCP/IP 4.0 试题回顾(3)
70-059TCP/IP 4.0 试题回顾(5)
70-059TCP/IP 4.0 试题回顾(6)
70-059TCP/IP 4.0 试题回顾(1)